KGPE-D16 external flashing instructions

Return to index

These will be re-added to Canoeboot at a later date, once proper testing has been done.

Initial flashing instructions for KGPE-D16.

This guide is for those who want Canoeboot on their ASUS KGPE-D16 motherboard, while they still have the proprietary ASUS BIOS present. This guide can also be followed (adapted) if you brick you board, to know how to recover.

Memory initialization is still problematic, for some modules. We recommend avoiding Kingston modules.

For more general information about this board, refer to ../hardware/kgpe-d16.html.

TODO: show photos here, and other info.

External programmer

Refer to spi.html for a guide on how to re-flash externally.

The flash chip is in a PDIP 8 socket (SPI flash chip) on the motherboard, which you take out and then re-flash with Canoeboot, using the programmer. DO NOT remove the chip with your hands. Use a chip extractor tool.

Markdown file for this page:

Subscribe to RSS for this site

Site map

This HTML page was generated by the Untitled Static Site Generator.